No products in the cart.
Progress Menu
x
Home / Womens / Bottoms, Garments, Skirts
This pattern is copyrighted 2021 to Rebecca Page by rebecca-page.com
Please feel free to make garments from this pattern to sell. If you do, we would love you to include a credit to rebecca-page.com as the pattern designer, but it is up to you.
The finished product may only be sold by crafters. It may not be mass produced. You can only sell the finished product; you cannot sell the pattern or these instructions.
Best of luck and happy sewing!
20
Ladies Hayley High Low Skirt
Member Rating
Difficulty Level
Beginner
Equipment Needed
Description
This is a fabulous, flowy five-panel skirt sewing pattern. It has a high-low hem with a billowy train effect at the back and an elasticated back waist. There is also the option to add pockets and a sash to complete the look.
Includes sizes XXS-5XL.
Not a member yet? Click here to sign up
- +Preparation
- Sizing – Sizing is different in different countries and stores, so please measure your model before picking your size. The ready-to-wear size your model normally fits into may be different from our size chart.
- Picking your size: Choose your size based on your waist measurement from the size chart as this skirt is semi-fitted at the waist. If you are at the bottom of your size range, you can adjust the waist by shortening the elastic in the back waistband.
- Adjusting height – This skirt is designed for a height of 5 foot 6 inches. If you are taller/shorter you may need to adjust the skirt pieces. This is how we recommend making this adjustment:
- Take each skirt panel pattern piece and measure a quarter way down from the waist of the skirt piece and draw a line horizontal to the grainline. Place the entire panel on top of another larger piece of paper and trace around it.
- Draw a straight line, parallel to the grainline, from the waist down past the hem onto the piece of paper underneath. This line can be anywhere on the pattern piece, as long as it is straight. You’ll use this line as a balance line to keep your pattern piece aligned.
- Take your pattern piece and cut straight through the horizontal adjustment line. Tape the top piece to the paper. Move the bottom pattern piece out the way.
- Draw the balance line onto the piece of paper, extending it from the line drawn on the skirt pattern piece. Place the bottom piece back onto the paper, matching the balance lines, and adding/removing height at this point. Trace around your new pattern piece. Repeat for all skirt pieces.
- Muslin – I recommend sewing a muslin (test garment) first so you can get the perfect fit:
- Use a woven fabric similar in weight to the final fabric you plan to use.
- Baste all the pieces together using a ½ inch seam allowance.
- Try on. If you are happy with the fit, continue to your final garment.
- If you feel the fit needs adjusting for your personal shape, turn the muslin inside out and try on again. Adjust the seams with pins/clips until you are happy.
- If your waistband is too loose, shorten your elastic.
- Trim your new seam allowances to ½ of an inch and pull out your basting stitches.
- These resulting pieces are your pattern pieces instead of the original pattern pieces. Continue to sew your final garment.
- Make sure to keep your adjusted pattern pieces in case you wish to make more!
- If you get stuck with fitting, see our favorite resources on our Pinterest Sewing Fitting Advice board.
- Elastic 1.5 inches wide – approximately 1mt / 1.10 yards
- Light weight interfacing for the front waistband (¼ yard will be more than enough)
- Thread to match
- Front Center Skirt – Cut 1 on fold
- Front Side Skirt – Cut 2 (1x mirror image pair)
- Back Skirt – Cut 2 (1x mirror image pair)
- Front Waistband – Fabric cut 2 on fold, Interfacing cut 1 on fold
- Back Waistband – Cut 2 on fold
- OPTIONAL Sash – Cut 2 on fold
- OPTIONAL Pockets – Cut 4 (2x mirror image pair
Project OverviewHayley High Low Skirt
Difficulty Level = Beginner
With five skirt panels and elasticated back waist, the Hayley High Low is the perfect flowy, fun, and flirty skirt. The high to low hemline creates a billowy train-like effect at the back. Add optional pockets and a sash, which can be tied to the back or front, to create multiple looks.
Our Facebook group is a great place to get help, share your tips and creations! We are a friendly bunch, and we love to help and see what you have made.
Please read the full instructions before getting started.
Wash, dry, and press your fabric before starting your project. A bit of prep now prevents shrinking and means your garment will stay the same size you made it.
Never leave a child or baby unattended or allow to sleep in a garment made from one of our patterns with ties, snaps, buttons, or anything they could remove, choke on, or get caught on. Always use caution if you are unsure. We love our patterns, but we love your bundles of joy more!
SizingSize Range
Womens XXS-5XL
Size Chart
This pattern is drafted to the sizes listed below. If you are between sizes, choose the larger size and adjust the pattern to remove the extra width to achieve the intended fit.
Chest
Waist
Hips
Inches
CM
Inches
CM
Inches
CM
XXS
31.0
79.0
25.0
63.5
34.0
86.0
XS
33.0
84.0
27.0
68.5
36.0
91.5
S
35.0
89.0
28.0
71.0
38.0
96.5
M
37.0
94.0
30.0
76.0
40.0
101.5
L
39.0
99.0
32.0
81.0
42.0
106.5
XL
42.0
106.5
35.0
89.0
45.0
114.0
XXL
45.0
114.0
38.0
96.5
48.0
122.0
3XL
48.0
122.0
42.0
106.5
51.0
129.5
4XL
51.0
129.5
46.0
117.0
54.0
137.0
5XL
54.0
137.0
50.0
127.0
57.0
145.0
Finished Measurements (Inches)
Waist
Hips
Center front length
Center back length
XXS
24.5
48.0
23.3
38.7
XS
26.5
50.3
24.3
38.7
S
27.5
52.0
25.0
38.7
M
29.5
53.0
26.0
38.7
L
31.5
55.0
27.0
38.7
XL
34.5
57.0
28.0
39.1
XXL
37.5
59.5
30.0
39.2
3XL
41.5
62.5
31.3
39.3
4XL
45.5
65.5
34.0
39.5
5XL
49.5
69.0
39.0
39.7
Fitting NotesThe Hayley High Low Skirt is a five panel skirt. It has an elastic back waistband with a flat front. The skirt is shorter in the front, longer in the back, with an almost circular, full hemline. This creates a train-like effect, floating behind you.
Materials and ToolsThe skirt can be made from nearly any medium weight woven fabric. If you a stiffer fabric, the skirt will ‘puff’ out more. If you use a softer fabric with more drape, the skirt will swish more. Some great suggestions are Cotton, Linen, Taffeta, Bubble crepe, Crepe de chine, Rayon, Viscose, Duchess satin, Crepe satin, Cotton drill, Cotton lawn or Velvet. If you use a fabric with a print or nap such as velvet, remember to cut all pieces in the same direction and to allow extra fabric for this.
Fabric Requirements 45 inches/115 cm wide (in YARDS)
Skirt
Skirt with OPTIONAL Pockets
XXS – XS
3.50
3.75
S – XXL
4.00
4.25
3XL – 5XL
4.50
4.75
Fabric Requirements 60 inches/150 cm wide (in YARDS)
Skirt
Skirt with OPTIONAL Pockets
XXS – M
3.00
3.25
L – XXL
3.25
3.50
3XL – 5XL
3.50
3.75
* If you are using a narrower fabric, a directional print, or a fabric with nap you may need more.
** Make sure to wash, dry, and press all fabrics before cutting out in case they shrink.You will also need:Tools needed are sewing machine, scissors, pins or clips, tape measure.
Printing Your PatternSettings
The pattern is a separate download. Choose either the US letter paper, A4 paper, or A0 paper size based on the printer you wish to use. If you are in the US or Canada then your printer will likely use US letter paper. Other regions normally use A4 paper. Some people prefer to print their patterns at a print shop: A0 is best in this case.
Print at 100%.
On the second page, you will find a 1-inch and a 3-inch square test box. Print this page first, on its own, and measure these squares.
Once you are happy that the test box is accurate, print the rest of the pattern pages.
Please follow this video for information and assistance on assembling this pattern.
Also, please note that some Rebecca Page patterns and projects also come with cut files and a printable design page which you can use to plan your project if you wish. These are provided in a separate section below to avoid any confusion!
+US Print Charts
Here are which pages to print for the US Files
Skirt OPTIONAL Pocket OPTIONAL Sash XXS – M 2-8, 10-16, 18-24, 26-32, 34-38 2-3 17, 25, 32 L 2-8, 10-16, 18-24, 26-32, 34-39 2-3 17, 25, 32 XL – 5XL 2-8, 10-16, 18-24, 26-32, 34-39 2-3 9, 17, 25, 32 +A4 Print Charts
Here are which pages to print for the A4 Files
Skirt OPTIONAL Pocket OPTIONAL Sash XXS – L 2-8, 10-16, 18-24, 26-32, 34-35, 37-39 2-3 8, 17, 25 XL – XXL 2-8, 10-16, 18-24, 26-32, 34-39 2-3 17, 25, 32 3XL – 5XL 2-8, 10-16, 18-24, 26-32, 34-39 2-3 9, 17, 25, 32, 33 Cutting InstructionsCut each of the pieces according to the directions on the pattern piece. Seam allowances are all included so just cut them as is.
Cutting Charts – All pattern pieces are included, however, if you prefer to cut using a cutting chart, the dimensions for the rectangular pieces (in INCHES) are below:
Back waistband (Cut 2)
Elastic (Cut 1)
Width
Length
Width
Length
XXS
2.5
23.3
1.5
11.2
XS
2.5
24.3
1.5
12.2
S
2.5
25.0
1.5
12.7
M
2.5
26.0
1.5
13.7
L
2.5
27.0
1.5
14.7
XL
2.5
28.0
1.5
16.7
XXL
2.5
30.0
1.5
19.7
3XL
2.5
32.0
1.5
20.5
4XL
2.5
34.0
1.5
21.7
5XL
2.5
36.0
1.5
23.7
Cutting Checklist:
NOTE – To cut fabric on the fold, fold your fabric over parallel to the selvage edges. Align the pattern piece so it is on the fold of the fabric. Cut around the edges, leaving the fold. If you have folded your fabric correctly the fold will be parallel to the two edges of the fabric that are finished. The raw edges (e.g. the ones you could pick at and threads would come off) will be at a right angle to your fold.
- + Instructions
- INTERFACING – Using the manufacturer’s instructions, apply interfacing to 1x Front Waistband piece
- PATTERN MARKINGS – Transfer all pattern markings to the fabric using a disappearing ink pen or tailors chalk: front pleat notches and pocket placements.
- STAYSTITCHING – Staystitch each of the Skirt panel pieces.
- SKIRT PANELS – Stitch each of the Front Side pieces to the Front Center piece. Using a serger or French seam, stitch together the two Back pieces at the center back seam.
- OPTIONAL POCKETS – Using French seams, stitch two Pocket Bags to the front of the Skirt and the two mirror pocket pieces to the back Skirt.
- SIDE SEAMS – Using a serger or French seam, stitch the Front Skirt piece to the back Skirt piece at the side seams, going around the Pocket pieces if you’ve added Pockets.
- OPTIONAL SASH – Fold Sash in half lengthwise and sew along the long edge and angled short edge. Trim seam allowance and turn right sides out. Press. OPTIONAL – Topstitch.
- WAISTBAND – Stitch the Front Waistband, right sides together, along the shorter of the long edges. Press the seam allowance open. Repeat to stitch the Back Waistband together. SASH OPTION: With the Waistband open, right side up, align the top of the Sash to the middle seam of the non-interfaced Waistband. This leaves a ½ inch gap at the bottom for your seam allowance. Baste. Repeat to baste the other Sash to the opposite side of the Front Waistband. WITH/WITHOUT SASH: Place your front and Back Waistbands right sides together. Stitch together at each short edge. Press the seam allowances open. Fold one long edge of the Waistband over by ½ inch. Press. Stitch the Waistband to the Skirt, right sides together. Press the seam allowance up. Fold the Waistband over to the wrong side of the Skirt. Pin along the Back Waistband only. Stitching in the ditch, sew just the back waist seam from one side seam to the other. ALTERNATIVE – Topstitch or slipstitch. Thread the elastic through the Back Waistband. Secure the elastic at each side seam by stitching in the ditch. With right sides facing out, pin the folded seam allowance of the Front Waistband. Stitch in the ditch across the front from one side seam to the other. OPTIONAL – Topstitch along the top edge of the Waistband all the way around the front and Back Waistband.
- HEM – Turn the hem ¼ inch toward the wrong side and press. Repeat and pin in place. Topstitch the hem in place.
Quick Glance Cheat Sheet½ inch seam allowance included (¼ then ¼ for French seams) – Top stitching ⅛ inch – Basting ¼ inch
Preparation –
Sewing –
0 . PreparationSeam Allowance
½ inch seam allowance included (¼ then ¼ for French seams) – Top stitching ⅛ inch – Basting ¼ inch
0.1Interfacing
Using the manufacturer’s instructions, apply interfacing to one Front Waistband piece
0.2Pattern Markings
Transfer all pattern markings to the fabric using a disappearing ink pen or tailors chalk.
1 . Skirt Panels1.1With the wrong sides together (right sides facing out), pin the Front Center Skirt to a Front Side Skirt, at the side seams.
1.4Turn right sides together (wrong sides facing out) and press as flat as you can. Make sure that the seam line is at the exact center of your fold.
1.5Stitch ¼ inch from the edge. Press the seam towards the side seam. This encases the raw edges so you can’t see them (a French seam).
1.6Repeat steps 1.1 to 1.5 to sew the other Front Side piece to the opposite side of the Front Center piece.
1.7Repeat steps 1.1 to 1.5 to sew the two back Skirt pieces together at the center seam.
2 . OPTIONAL Pockets2.1Place one Pocket piece wrong sides together along the front Skirt side seam, aligning the top of the Pocket with the Pocket marking on the pattern piece.
2.4Turn wrong sides out and press as flat as you can. Make sure that the seam line is at the exact center of your fold.
2.5Stitch again approximately ¼ inch from the edge.
This will encase the raw edges, so you can’t see them (a French seam).
2.8Repeat steps 2.1 to 2.7 to sew the other Pocket piece to the opposite side of the front Skirt, and the two mirror Pocket pieces to each side of the back Skirt.
When you attach your Pockets to the back Skirt piece, check the alignment of the Pocket against the front by holding the front and back Skirt pieces together. The back Pockets need to match the front Pockets at the side seams.
3 . Side Seams3.1NO POCKETS OPTION – With the wrong sides together, (right sides facing up), stitch all the way down the side seam and then skip to step 3.6.
POCKETS OPTION – With the wrong sides together (right sides facing out), pin the front Skirt to the back Skirt at the side seams. Match the Pockets together and pin.
3.5Turn wrong sides out and press as flat as you can. Make sure that the seam line is at the exact center of your fold
3.6NO POCKETS OPTION – Stitch again, approximately ¼ inch from the edge. Press seam toward the front.
POCKETS OPTION – Stitch again, approximately ¼ inch from the edge, including the Pockets. Sew the side of the Skirt, around the Pocket, and back down the side. Press seam toward the back.
This encases the raw edges, so you can’t see them (a French seam).
3.7Repeat steps 3.1 to 3.6 for the other side of the Skirt.
4 . OPTIONAL Sash4.0If you would like to add a Sash, follow the steps below. Otherwise, skip to step 5.
4.1Fold the Sash in half, right sides together. Pin along the long bottom edge and the pointed edge.
4.4Turn right sides out.
There are several ways to turn the Sash tube right side out. If you have a preferred method that you are more familiar with, please use it. Alternatively, here is how I do it with a loop turner.
Insert the loop turner inside the Sash tube until it reaches the other end. Perforate the fabric with the little clasp and push it to close the hook. Pull the loop turner back inside very delicately. While pulling the loop turner inside, smooth the fabric upwards towards the top of the hook and roll the fabric on itself inside the tube so it is wrong sides together. Continue to roll until you’ve turned the tube right side out completely.
Roll the seam under between your fingers so that it lays flat. Press. If you would like a more billowing look, do not press.
4.5OPTIONAL – Topstitch both long sides and the angled edge. This gives a crisp edge to the Sash.
Repeat steps 4.1 to 4.5 for the other Sash.
5 . Waistband5.1Lay the two Front Waistband pieces, right sides together, and pin along the shorter of the long edges. The wider edge will be attached to the waist of the Skirt.
5.4Repeat steps 5.1 to 5.3 to sew the Back Waistband together.
NOTE – The Back Waistband is two rectangles, without an angled shape to it. If you are using directional fabric, we are sewing the top edge in this step.
5.6Repeat step 5.5 to baste the other Sash to the opposite side of the Front Waistband.
5.7Place your front and Back Waistbands right sides together. Pin together at each short edge.
NOTE – If you have added the Sash, keep it out of the way.
5.10Fold one long edge of the Waistband over to the wrong side by ½ inch. If you have done the Sash, this will be the long edge furthest away from the Sash. If you haven’t done the Sash, it’s the raw edge of the interfaced Front Waistband and corresponding Back Waistband.
Press.
5.11Slide the Waistband over the Skirt, right sides together, matching the raw edges. Pin together.
NOTE – You are attaching the Waistband at the non-pressed edge.
5.14We are going to ‘stitch in the ditch’. This is where you stitch exactly on top of a previous seam. You will just catch the other side of the Waistband in your stitching, so the raw edges are all hidden. The stitching won’t easily be visible in the finished garment.
From the right side of the Skirt, start at the LEFT side seam and stitch along the back waist seam only, where the Skirt meets the Waistband.
Stitch slowly and hold the Waistband and Skirt flat on both sides of the presser foot to help stitch right into the crease so it’s not visible on the finished Skirt. Occasionally, lift the Skirt up to check that you are catching the other side of the Waistband.
TIP – Use a matching thread and aim for a tiny fraction onto the Skirt instead of the Waistband. This usually ends up fairly invisible.
ALTERNATIVE – If you would prefer, you can topstitch on the actual Waistband (approximately ⅛ inch from the crease). Your stitching will be more visible but it’s much easier! Or you can hand sew using a slipstitch.
5.15Thread the elastic through the Back Waistband.
TIP – To thread the elastic, I like to pin one end of the elastic to the Skirt, so it doesn’t slip inside. I then put a safety pin on the other end and thread it through, using that to guide it.
5.16You will be stitching the elastic to the side seams.
With right sides facing up, sew along the Waistband side seam – stitch in the ditch again. This secures your elastic.
Sew the elastic at the opposite side seam.
FIT CHECK – If you have your model available, try the Skirt on. Check that it will sit comfortably around their waist and will hold up the Skirt, before continuing to the next step.
5.18Stitch in the ditch across the front sewing from one side seam to the other.
OPTIONAL – To help the elastic sit better in the Waistband, topstitch along the top edge of the Waistband all the way around the front and Back Waistband, stretching the elastic as you topstitch the back of the Waistband. This gives a subtle paper bag (puff) effect to the top of the Waistband.
6 . Hem6.0FIT CHECK – Try on the Skirt and check the hem length. The hem will be ½ an inch. Make any adjustments you prefer and continue.
SERGER / OVERLOCKER OPTION – If you are using a serger, serge along the bottom edge. Do not remove any fabric. Press ½ inch to the wrong side. Topstitch closed.
REGULAR SEWING MACHINE OPTION – Follow the steps below.
6.1Turn the hem ¼ inch toward the wrong side and press.
6.2Turn the hem under another ¼ inch and press again. This encloses the raw edges.
Pin in place.
6.3Topstitch the hem in place by stitching close to the folded edge.
TIP – You want your stitching to be the same distance from the bottom of the Skirt, so it looks uniform from the outside. To do this, use your presser foot or a marking on your sewing machine to line up your fabric as you stitch.
- + Finishing Notes and Congratulations
Finishing Notes and Congratulations
Congratulations, your Hayley High Low Skirt is done. Enjoy!
We would love to hear how you got on and see photos of your finished project!
Join us at our Facebook Group, tag us on Instagram, or use the hashtag #rphayleyhighlowskirt.
Thank you for using a Rebecca Page pattern.
© Copyright 2021
All Rights Reserved
Sales + Licencing InformationProject OverviewHayley High Low Skirt
Difficulty Level = Beginner
With five skirt panels and elasticated back waist, the Hayley High Low is the perfect flowy, fun, and flirty skirt. The high to low hemline creates a billowy train-like effect at the back. Add optional pockets and a sash, which can be tied to the back or front, to create multiple looks.
SizingSize Range
Womens XXS-5XL
Size Chart
This pattern is drafted to the sizes listed below. If you are between sizes, choose the larger size and adjust the pattern to remove the extra width to achieve the intended fit.
Chest
Waist
Hips
Inches
CM
Inches
CM
Inches
CM
XXS
31.0
79.0
25.0
63.5
34.0
86.0
XS
33.0
84.0
27.0
68.5
36.0
91.5
S
35.0
89.0
28.0
71.0
38.0
96.5
M
37.0
94.0
30.0
76.0
40.0
101.5
L
39.0
99.0
32.0
81.0
42.0
106.5
XL
42.0
106.5
35.0
89.0
45.0
114.0
XXL
45.0
114.0
38.0
96.5
48.0
122.0
3XL
48.0
122.0
42.0
106.5
51.0
129.5
4XL
51.0
129.5
46.0
117.0
54.0
137.0
5XL
54.0
137.0
50.0
127.0
57.0
145.0
Finished Measurements (Inches)
Waist
Hips
Center front length
Center back length
XXS
24.5
48.0
23.3
38.7
XS
26.5
50.3
24.3
38.7
S
27.5
52.0
25.0
38.7
M
29.5
53.0
26.0
38.7
L
31.5
55.0
27.0
38.7
XL
34.5
57.0
28.0
39.1
XXL
37.5
59.5
30.0
39.2
3XL
41.5
62.5
31.3
39.3
4XL
45.5
65.5
34.0
39.5
5XL
49.5
69.0
39.0
39.7
Materials and ToolsThe skirt can be made from nearly any medium weight woven fabric. If you a stiffer fabric, the skirt will ‘puff’ out more. If you use a softer fabric with more drape, the skirt will swish more. Some great suggestions are Cotton, Linen, Taffeta, Bubble crepe, Crepe de chine, Rayon, Viscose, Duchess satin, Crepe satin, Cotton drill, Cotton lawn or Velvet. If you use a fabric with a print or nap such as velvet, remember to cut all pieces in the same direction and to allow extra fabric for this.
Fabric Requirements 45 inches/115 cm wide (in YARDS)
Skirt
Skirt with OPTIONAL Pockets
XXS – XS
3.50
3.75
S – XXL
4.00
4.25
3XL – 5XL
4.50
4.75
Fabric Requirements 60 inches/150 cm wide (in YARDS)
Skirt
Skirt with OPTIONAL Pockets
XXS – M
3.00
3.25
L – XXL
3.25
3.50
3XL – 5XL
3.50
3.75
* If you are using a narrower fabric, a directional print, or a fabric with nap you may need more.
** Make sure to wash, dry, and press all fabrics before cutting out in case they shrink.You will also need:- Elastic 1.5 inches wide – approximately 1mt / 1.10 yards
- Light weight interfacing for the front waistband (¼ yard will be more than enough)
- Thread to match
Tools needed are sewing machine, scissors, pins or clips, tape measure.