No products in the cart.
Progress Menu
x
Home / Technique Tutorial / Tutorials
This pattern is copyrighted 2022 to Rebecca Page by rebecca-page.com
Please feel free to make garments from this pattern to sell. If you do, we would love you to include a credit to rebecca-page.com as the pattern designer, but it is up to you.
The finished product may only be sold by crafters. It may not be mass produced. You can only sell the finished product; you cannot sell the pattern or these instructions.
Best of luck and happy sewing!
4
![]()
Serenity Dress Fitting Adjustments
Member Rating
Difficulty Level
Beginner
Equipment Needed
Description
In this free Serenity Dress Fitting Adjustments Tutorial you will get:
- A full tutorial with step-by-step instructions for fun, easy sewing.
- Full-size, instant-download tutorial that you can print at home and get started straight away!
- Beginner friendly instructions you’ll love to use (which are also great for sewing with your kids!).
- A tutorial that includes adjustments for height, FBA, cuff, full tummy, and biceps.
Not a member yet? Click here to sign up
- +Preparation
- This adjustment tutorial includes the following adjustments:
- Height adjustment
- Full bust adjustment
- Cuff adjustment
- Full tummy adjustment
- Bicep adjustment
- Your pattern
Clear ruler - Pattern paper for tracing off your original Rebecca Page pattern, as we are going to split and spread the pattern. I recommend something slightly thicker than tissue paper, as that tears easily.
- Pen or pencil
- Sticky tape
Project OverviewSerenity Dress Fitting Adjustments
Difficulty Level = Beginner
When making adjustments to patterns, it is important to start with the height adjustments before making any other adjustments.
Our patterns are designed for a height of 5 foot 6 inches. If your height is above/below this, you will need to adjust the Serenity Dress to get the perfect fit.
Our ladies’ patterns are designed for a sewing C cup bust (B cup in most ready to wear bras). If you don’t fall into this size you may need to adjust your pattern to get the best fit at the bust, armholes and across the back. We have found cup sizes A to D fit well without any adjustment. However, if you have over a D cup, you may need to do a full bust adjustment (FBA).
[Project Line Drawing here]
Our Facebook group is a great place to get help, share your tips and creations! We are a friendly bunch, and we love to help and see what you have made.
Please read the full instructions before getting started.
Wash, dry, and press your fabric before starting your project. A bit of prep now prevents shrinking and means your garment will stay the same size you made it.
Never leave a child or baby unattended or allow to sleep in a garment made from one of our patterns with ties, snaps, buttons, or anything they could remove, choke on, or get caught on. Always use caution if you are unsure. We love our patterns, but we love your bundles of joy more!
SizingSize Range
Womens 1-10, Womens Curvy 6C-15C
Finished Measurements (Inches)
To calculate the amount, you will need to adjust the pattern by, subtract your height from 5 foot 6. You will need to make adjustments using this measurement. As this height measurement is for a full-length pattern, and we are only adjusting the bodice, you will halve this amount to calculate your measurement. For the maxi length you can also add/remove length at the hem.
The table below shows how to calculate your measurement (in INCHES). Use this as a guideline to calculate the number of inches required to adjus} the pattern pieces by.
Follow below to complete your height adjustment.
Shorter than pattern height of 5 foot 6 inches Taller than pattern height of 5 foot 6 inches Your height Difference Divide by 2 (for bodice length only) Divide by 2 (halfway through armhole and waist adjustment) Your Height Difference Divide by 2 (for bodice length only) Divide by 2 (halfway through armhole and waist adjustment) 5 foot 3 inches 3 inches 1.5 inches .75 inches 5 foot 7 inches 1 inch 1/2 inch 0.25 inches 5 foot 4 inches 2 inch 1 inch 1/2 inch 5 foot 8 inches 2 inches 1 inch 1/2 inch 5 foot 5 inches 1 inch 1/2 inch 0.25 inches 5 foot 9 inches 3 inches 1.5 inches 1.5 inches Materials and ToolsYou will need:
- + Instructions
1 . Adjustment Lines1.1.1
Print and cut out your Dress pattern piece.
Starting at the long straight edge, measure down and mark the pattern piece. See chart below.
in cm XXS 8.66 22 XS 8.86 22.5 S 9.06 23 M 9.26 23.5 L 9.45 24 XL 9.65 24.5 XXL 10.43 26.5 3XL 10.63 27 4XL 10.83 27.5 5XL 11.02 28 1.1.2Draw a line (1) from this marking across to the waist pattern marking.
1.1.3Find and mark the center of the neck.
Draw a line (2) from the center of the neck to the line drawn in step 1.2.
NOTE – The line needs to be at a 90-degree angle to the line drawn in step 1.2.
1.1.4Measure the center line (2). Mark ⅓. Draw a parallel line (3) to the waist from one edge straight across the pattern to the other shoulder.
If you need to add into the height, follow step 2. If you need to shorten the pattern, follow step 3.
2 . Adding Length2.2.1Place your pattern piece on top of another larger piece of paper.
Cut along the waistline (1).
Keeping the two pieces parallel, adjust the width between the pieces by your calculated measurement. Tape in place.
2.2.2Cut through the top line (3).
2.2.3Cut along the center line (2) up to the back neckline, leaving a small hinge.
NOTE – Do not cut all the way through the neckline.
2.2.4Pivot the top piece so that the shoulder edges touch. Tape in place.
Draw around the pattern piece and cut it out.
2.2.5SERENITY DRESS: If the line at the center neckline overlaps, measure how much it overlaps by and divide it by 2.
Measure from the center front neckline down by this measurement. Redraw the front neckline in the same shape as the original. This will ensure that the Scarf will still fit at the neckline.
SERENITY INFINITY: You will not need to make this adjustment as the Scarf is not attached to this version.
Your height adjustment is complete! Use this new Dress pattern piece to make a muslin (a test garment out of inexpensive fabric) to check the fit.
3 . Removing Length3.3.1Place your pattern piece on top of another larger piece of paper.
Cut along the waistline (1) and the top line 3.
Keeping the two pieces parallel, overlap the pieces at the waistline by the amount you need to shorten. Tape.
3.3.2Cut along the center line (2) up to the back neckline, leaving a small hinge.
NOTE – Do not cut all the way through the neckline.
3.3.3Move the top pattern piece down so that it sits as per the original shape at the shoulders, dipping the center as needed. Tape.
Draw around the pattern piece and cut it out.
Your height adjustment is complete! Use this new Dress pattern piece to make a muslin (a test garment out of inexpensive fabric) to check the fit.
1 . Adjustment Lines1.1.1Hold the Front pattern piece against your body, centralizing the neckline. Find the bust point and mark it on the pattern piece.
1.1.2Draw a line (1) from the bust point to the top curve of the armscye.
1.1.3Draw a line (2) from the bust point straight across to the drape side (straight long edge).
NOTE – This line should be at a 90-degree angle.
1.1.4Draw a line (3) from the shoulder edge straight to the bust point.
1.1.5Draw a line (4) from the bust point through to the neckline, keeping the same angle as the line from bust point to armscye line (1).
2 . Adding into the Bust2.Cut along line 2 and 3, leaving a hinge at the shoulder. Do not cut all the way through.
Cut along line 1 and 4, leaving a hinge on either end.
2.2.2You are only adjusting one side of the dress as the other side is very drapey and won’t need adjusting.
Pivot the pattern to add the amount needed, keeping the straight seam (draped edge) closed, only adding fullness into the center front.
2.2.3Place the Front onto a piece of paper. Blend the seam lines at the shoulder and the drape seam (long straight edge).
2.2.4Cut out your new pattern.
Make sure to transfer all markings to your new Front piece.
Your FBA is complete! Use this new Front pattern piece to make a muslin (a test garment out of inexpensive fabric) to check the fit.
You will also need to adjust the Cuffs. Follow the Cuff Adjustment step below.
1 . Cuff Adjustment1.1.1Draw a line through the centre of the Cuff.
1.1.2Cut along this line.
1.1.3Find the centre of one side of the Cuff and draw a line. Cut along this line.
1.1.4Place the two pieces onto a piece of paper. Separate the pieces by the amount you added into the Front for the bust adjustment, keeping the original foldline parallel. Tape.
Draw around this piece. Cut it out.
1.1.5Draw around this new piece onto a new piece of paper.
Flip it over so that it is mirrored and draw around that side. Add the foldine back onto the straight edge.
Your Cuff adjustment is complete! Use this new pattern piece to make a muslin (a test garment out of inexpensive fabric) to check the fit.
1 . Adjustment Lines1.1.1Draw a line (1) from the waist pattern marking straight down to the straight edge.
1.1.2Measure 7.8 inches / 20cm down from the first line. Draw a hip line (2) parallel to the first line.
1.1.3Draw a line (3) from the side neck point (at the longer shoulder) straight down to the straight edge.
1.1.4Find the center of the waistline. Draw a line (4) parallel to the straight edge of the pattern, from the side neck line to the bottom line.
2 . Adding into the Tummy2.2.1Cut through hip line (2) and side neck point line (3). Place the top and bottom pieces aside for now. You
2.2.2Starting at the straight edge, cut along the waist line (1), leaving a hinge. Do not cut all the way through.
Cut along the center line (4), leaving a hinge at either end.
2.2.3Place the pattern onto a piece of paper.
Pivot the pieces by the amount you need to adjust. Tape.
2.2.4Reattach all pieces and tape.
2.1.5Straighten the curve created on the straight edge.
Your Full Tummy Adjustment is complete! Use this new pattern piece to make a muslin (a test garment out of inexpensive fabric) to check the fit.
1 . Adjustment Lines1.1.1Find the half way point on the sleeve at the shoulder edge. Draw a line (1) straight down to the armscye.
Find the half way point on the neckline from the side neck point. Draw a line (2) straight down to the end of the Sleeve.
2 . Adding into the Bicep2.2.1Cut through line 1 from the under arm, leaving a hinge. Do not cut all the way through.
Cut through line 2, leaving a hinge on either end.
2.2.2Place the pattern onto a piece of paper. Pivot the pattern piece to achieve the amount needed. Tape.
2.2.3If adjustment is needed throughout the sleeve, cut the hinge at the sleeve hem and adjust.
2.2.4Draw the back neckline and new sleeve.
Your Bicep Adjustment is complete! Use this new pattern piece to make a muslin (a test garment out of inexpensive fabric) to check the fit.
- + Finishing Notes and Congratulations
Finishing Notes and Congratulations
Congratulations, your Serenity Dress is done. Enjoy!
We would love to hear how you got on and see photos of your finished project!
Join us at our Facebook Group, tag us on Instagram, or use the hashtag #rpserenity.
Thank you for using a pattern.
© Copyright 2020
All Rights Reserved
Sales + Licencing InformationProject OverviewSerenity Dress Fitting Adjustments
Difficulty Level = Beginner
When making adjustments to patterns, it is important to start with the height adjustments before making any other adjustments.
Our patterns are designed for a height of 5 foot 6 inches. If your height is above/below this, you will need to adjust the Serenity Dress to get the perfect fit.
Our ladies’ patterns are designed for a sewing C cup bust (B cup in most ready to wear bras). If you don’t fall into this size you may need to adjust your pattern to get the best fit at the bust, armholes and across the back. We have found cup sizes A to D fit well without any adjustment. However, if you have over a D cup, you may need to do a full bust adjustment (FBA).
- This adjustment tutorial includes the following adjustments:
- Height adjustment
- Full bust adjustment
- Cuff adjustment
- Full tummy adjustment
- Bicep adjustment
[Project Line Drawing here]
SizingSize Range
Womens 1-10, Womens Curvy 6C-15C
Finished Measurements (Inches)
To calculate the amount, you will need to adjust the pattern by, subtract your height from 5 foot 6. You will need to make adjustments using this measurement. As this height measurement is for a full-length pattern, and we are only adjusting the bodice, you will halve this amount to calculate your measurement. For the maxi length you can also add/remove length at the hem.
The table below shows how to calculate your measurement (in INCHES). Use this as a guideline to calculate the number of inches required to adjus} the pattern pieces by.
Follow below to complete your height adjustment.
Shorter than pattern height of 5 foot 6 inches Taller than pattern height of 5 foot 6 inches Your height Difference Divide by 2 (for bodice length only) Divide by 2 (halfway through armhole and waist adjustment) Your Height Difference Divide by 2 (for bodice length only) Divide by 2 (halfway through armhole and waist adjustment) 5 foot 3 inches 3 inches 1.5 inches .75 inches 5 foot 7 inches 1 inch 1/2 inch 0.25 inches 5 foot 4 inches 2 inch 1 inch 1/2 inch 5 foot 8 inches 2 inches 1 inch 1/2 inch 5 foot 5 inches 1 inch 1/2 inch 0.25 inches 5 foot 9 inches 3 inches 1.5 inches 1.5 inches Materials and ToolsYou will need:
- Your pattern
Clear ruler - Pattern paper for tracing off your original Rebecca Page pattern, as we are going to split and spread the pattern. I recommend something slightly thicker than tissue paper, as that tears easily.
- Pen or pencil
- Sticky tape