Women's Chloe Cami Top

Chloe Cami

Difficulty Level = Beginner 

This beautiful flowing top is perfect for wearing loose over jeans, trousers, skirts, or shorts! Layer with a cardigan for winter, or on its own in summer. Easily lengthened as a tunic or shortened as a crop top.

There are two strap lengths. You can mix or match any of them for different looks. You can have one or two straps on each shoulder, and they can either go straight over the shoulder or be crossed to the opposite shoulder at the back.

The top is two layers and comes with two different lengths. The shorter length is a crop length, the longer length comes to the top of the hip bone. Either have both the longer length, both the shorter length or cut one of each for a layered look.

Mix and match the options for the exact look you want!

Our Facebook group is a great place to get help, share your tips and creations! We are a friendly bunch, and we love to help and see what you have made.

Please read the full instructions before getting started.

Wash, dry, and press your fabric before starting your project. A bit of prep now prevents shrinking and means your garment will stay the same size you made it.

Never leave a child or baby unattended or allow to sleep in a garment made from one of our patterns with ties, snaps, buttons, or anything they could remove, choke on, or get caught on. Always use caution if you are unsure. We love our patterns, but we love your bundles of joy more!

Size Range

Womens XXS-5XL

Size Chart

This pattern is drafted to the sizes listed below. If you are between sizes, choose the larger size and adjust the pattern to remove the extra width to achieve the intended fit.

Finished Measurements (Inches)

• Ease – This is a very loose fit top. It should fit the body well at the top edge around the decollate and the upper back, then come outwards and be loose fitting at the hem. Make sure to check the fabric suggestions in the next section to ensure your fabric looks how you like. With so much volume in the hem area, fabric selection is key to getting the drape and look you prefer.
• Sizing – Sizing is different in different countries and stores, so please measure your model before picking your size. The ready-to-wear size your model normally fits into may be different from our size chart.
• Picking your size – When picking your size, if you fall between sizes, go for the size with the correct bust measurement. That way the top part is likely to fit well. Then, grade out or in to the correct waist and hip size.
• Length – The longer of the two tops is designed to finish at the top of the hipbone. This makes it shorter than many other top designs, and most definitely shorter than tunic length tops. It looks amazing worn loose over skirts, shorts, and trousers, however, you will find it is unlikely to tuck into the top of shorts or pants. The shorter of the two tops is designed to finish around or just under the bellybutton. For most sizes, this gives it a crop type appearance.
  • If you wish to have either top longer, lengthen the pattern by extending it down at the hem, following the side seam line outwards so it continues to get wider. This will keep the shape the same along the bodice and just make it longer at the hemline. 
  • If you wish to have either top shorter, I recommend cutting and sewing the top as is, then try it on and cut to your preferred length at step 5, leaving 1 inch for hemming.
• Height adjustment– For ladies, the pattern is designed for a height of 5 foot 6 inches. 
  • If you are shorter than your size range, check the strap length and shorten these as desired to lift the top up, then shorten the hemline as suggested above.
  • If you are taller than your size range, cut your straps 1 inch longer than on the cutting chart and pattern pieces. Then, adjust them to fit when sewing. Add the additional top length required at the hemline as above.
• Bust adjustment – The pattern is designed for a sewing C cup. Every person is a slightly different shape, and the top will sit differently on different bust shapes and silhouettes. 
  • If you are a smaller cup size, you may need to make alterations to have the shirt sit how you prefer. There are many good “small bust adjustment” tutorials on the internet to show you how to adjust a pattern for perfect fit.
  • If you are a larger cup size, do a muslin to check you are happy with the fit. In testing we found bust sizes up to a J cup fit well in most sizes, however it depended on personal shape and for some, a larger cup size lifted the hemline at the front and required more length added at the front hemline. If you find you need to do a full bust adjustment, adjust the pattern pieces accordingly.
• Elastic – To get a custom fit, check your elastic against your model and adjust from the suggested length for your desired fit.  
• Muslin – To get a perfect fit, make a muslin (test garment) out of practice / old fabric to see if you want to make any fit adjustments. 
• If you get stuck with fitting, see our favorite resources on our Pinterest Sewing Fitting Advice board. 

You will need light to medium weight woven fabric for this pattern: 

• Any light or medium weight woven fabric will work. 
• A fabric with drape (such as chiffon, georgette, rayon or crepe de chine) will give a softer look to the blouse. 
• A fabric with more body (such as a quilting cotton, linen or taffeta) will give more structure to the blouse. 
• Fabrics like rayon challis can also be cut on the bias to give more drape.  
• Remember when picking your fabric that the hemline is loose and voluminous. A fabric with drape will give beautiful folds and movement. A fabric without drape that is stiffer will look boxier and more oversized. Fabric choice is key for this design to get the look you’re aiming for.

Fabric Requirements 45 inches/115 cm wide (in YARDS) 

* If you are using a narrower fabric, a directional print, or a fabric with nap you may need more.
** Make sure to wash, dry, and press all fabrics before cutting out in case they shrink.
*** Fabric estimates are for two long layers.  If you are doing one or both short layers, you may need less fabric.  

You will also need:

• Thread to match

Tools needed are sewing machine, scissors, tape measure, and pins or clips. A serger or overlocker is optional but not required.

Settings

The pattern is a separate download. Choose either the US letter paper, A4 paper, or A0 paper size based on the printer you wish to use. If you are in the US or Canada then your printer will likely use US letter paper. Other regions normally use A4 paper. Some people prefer to print their patterns at a print shop: A0 is best in this case.

Print at 100%.

On the second page, you will find a 1-inch and a 3-inch square test box. Print this page first, on its own, and measure these squares.

Once you are happy that the test box is accurate, print the rest of the pattern pages.

Please follow this video for information and assistance on assembling this pattern.

Also, please note that some Rebecca Page patterns and projects also come with cut files and a printable design page which you can use to plan your project if you wish. These are provided in a separate section below to avoid any confusion!

Cut each of the pieces according to the directions on the pattern piece. Seam allowances are all included so just cut them as is.

The instructions on the pattern pieces will have you cut a layered top (one short top, with a longer top underneath), with one straight strap going over each shoulder, and one longer strap crossing over at the back. However, you can mix and match these according to your preference. Read below for details.

Tops – You will need two complete tops, each with a front and back. There are two lengths of top included. The shorter top is approximately crop length. The longer top is approximately hip bone length. Decide now if you want two short tops, two long tops or a layered look with one short and one long. You should cut 2x fronts and 2x backs of the length/s you want. The two tops will be layered one on top of the other. The one on top we will call the ‘Outer Layer’, the one underneath we will call the ‘Inner Layer’.

Straps – There are 2 strap lengths included. The shorter one goes straight over the shoulder. The longer one crosses diagonally from front to back. You can have one or two straps per shoulder. For stability, you need one straight strap per shoulder.  But you can add a crossed strap.  Decide now if you want one or two straps per shoulder, and if you want them to be straight (short strap) or one of each (one short and one long per shoulder).

The strap pattern pieces are included, however, if you prefer to cut using a cutting chart, they are rectangular and dimensions for them (in INCHES) are below: 

Cutting Checklist:

Outer Layer (can be cut using the ‘Short’ or ‘Long’ pattern pieces) 

• Front – Cut 1 on fold
• Back – Cut 1 on fold

Inner Layer (can be cut using the ‘Short’ or ‘Long’ pattern pieces)

• Front – Cut 1 on fold
• Back – Cut 1 on fold

Straps (can be cut using the ‘Short’ or ‘Long’ pattern pieces)

• Strap – Cut 2 (1 per shoulder), or 4 (2 per shoulder)

NOTE – To cut fabric on the fold, fold your fabric over parallel to the selvage edges. Align the pattern piece so it is on the fold of the fabric. Cut around the edges, leaving the fold. If you have folded your fabric correctly the fold will be parallel to the two edges of the fabric that are finished. The raw edges (e.g. the ones you could pick at and threads would come off) will be at a right angle to your fold.

½ inch seam allowance included (¼ then ¼ for French seams) – Top stitching ⅛ inch – Basting ¼ inch

Preparation –

1. STAY STITCH – Stay stitch your Front neckline, Back neckline and all armscye edges.  

Sewing –

1. SIDE SEAMS – Serge or French seam the side seams for each layer of top.
2. STRAPS – Fold each strap in half right sides together and sew along the raw long edge. Trim the bulk, turn, and press. 
3. ATTACHING FRONT STRAPS – Baste in place on the front of the top, right side out. Pin or clip the ends out of the way.  Slip the outer layer inside the inner layer, both with right sides facing out, sew around the top edge. Trim the bulk from the raw edge and clip curves. Turn your garment right sides out, press and sew ¼ inch from edge, enclosing previous seam.  
4. ATTACHING BACK STRAPS – Trim end of Straps, fold ¼ inch and press. Pin or clip to inside of top Back. Try on to check length. Sew a square at the end of the Strap to attach. Choose the style to attach the longer Straps.
5. HEM – Press hem ½ inch, turn another ½ inch, press, and topstitch close.

Congratulations, your Chloe Cami is done. Enjoy! 

We would love to hear how you got on and see photos of your finished project!

Join us at our Facebook Group, tag us on Instagram, or use the hashtag #rpchloecami.

Thank you for using a Rebecca Page pattern.

© Copyright 2021

All Rights Reserved